<strong>5083 belongs</strong> to Al-Mg-Si alloy, which is widely used, especially in the construction industry.<br> <strong>It is the most promising alloy. </strong>Good corrosion resistance, good weldability, good cold processing, and has moderate strength.<br> <strong>5083 is magnesium, </strong>which has good forming performance, corrosion resistance, weldability and medium strength. <br> <strong>5083 aluminum </strong>is one of the most widely used antirust<br>

<strong>7075 aluminum </strong>alloy is a cold - treated forging alloy, high strength, far better than mild steel. <br/> <strong>7075 </strong>is one of the strongest alloys commercially available. <br/> <strong>Under heat treatment</strong>, can achieve very high strength characteristics.<br/> <strong>The alloy </strong>also has good mechanical properties and anode reaction.<br/> <strong>Aluminum</strong> is a silver-white light metal, relatively soft, density 2.7g/cm3, melting point 660.4℃, boiling point 2467℃, aluminum and aluminum alloys have many excellent physical properties, has been very widely used.

<strong>6061</strong> is a common duralumin with good machinability and moderate strength. <br> <strong>6061</strong> is a heat-treatable alloy with good formability, weldability, machinability, and moderate strength.<br> <strong>It can still </strong>maintain good operation after annealing.<br> <strong>If there is a certain </strong> amount of manganese and chromium, the bad effect of iron can be neutralized.

<strong>Thickness&nbsp;</strong> 0.1-400mm，etc<br/> <strong>Length:</strong>100-12000mm，or as required<br/> <strong>Width:</strong>20-3000mm，etc<br/> <strong>Standard:</strong>ASTM，AISI，JIS，GB，&nbsp;DIN，EN<br/> <strong>Certification:</strong>ISO, SGS，BV